Smart Motion Sensor

Smart Motion Sensor Trigger lights to automatically turn on when you enter a room or turn off when there's no motion for a specified length of time. Receive an immediate alert if unexpected motion is detected while you're away or asleep. Save energy by turning off lights and electronics when people leave home or when no motion is detected.

  • Input voltage : 230/120V~, 50/60GHz, 6A.
  • Output voltage: 230/120V ,Maximum Load: 6A and Maximum Power : 400W
  • Device Operates with 3.3V DC .
  • Detection range: Up to 30 metres.
  • Field of view: 120 degrees and 360 degrees.
  • Sensor type: Passive InfraRed (PIR).
  • Detection time: Less than 2 seconds
  • Works on 2.4GHz frequency on all channels.
  • Uses 802.11 b / g / n wireless standards.
  • Works STA / AP modes support for devices Adding and controlling.
  • Operating Temperature: -40℃ ~ + 125 ℃.
  • Operating Humidity: 10%-90% non-condensing.
  • Weight: about 100g .
  • Guided Install: Zylfi app guides you through easy step-by-step installation. No need to understand complex switch wiring.

Smart GAS Sensor

Smart Gas Sensor will sound a loud alarm with LED light blinking once the gas leak is detected, also you will get alerts on your Smart Phone once it detects gas leaking. No matter where you are, you will get the information and ask for help in time, giving you peace of mind knowing your home and family are safe.  

  • Device Operates with 3.3V DC .
  • Detection range: Up to 10 metres.
  • Detection time: Less than 2 seconds.
  • Works on 2.4GHz frequency on all channels.
  • Uses 802.11 b / g / n wireless standards.
  • Works STA / AP modes support for devices Adding and controlling.
  • Operating Temperature: -40℃ ~ + 125 ℃.
  • Operating Humidity: 10%-90% non-condensing.
  • Weight: about 100g .
  • Guided Install: Zylfi app guides you through easy step-by-step installation. No need to understand complex switch wiring.

Smart Smoke Sensor

Smart Smoke Sensor will sound a loud alarm with LED light blinking once the Smoke is detected, also you will get alerts on your Smart Phone once it detects the Smoke g. No matter where you are, you will get the information and ask for help in time, giving you peace of mind knowing your home and family are safe.

  • Device Operates with 3.3V DC.
  • Detection range: Up to 10metres
  • Detection time: Less than 2 seconds.
  • Works on 2.4GHz frequency on all channels.
  • Uses 802.11 b / g / n wireless standards.
  • Works STA / AP modes support for devices Adding and controlling.
  • Operating Temperature: -40℃ ~ + 125 ℃.
  • Operating Humidity: 10%-90% non-condensing.
  • Weight: about 100g.
  • Schedules to set smart switch to automatically turn on and off as per scheduled times.

Smart Multi Sensor

The Smart Multi Sensor alarm uses six different sensors to quickly detect different types of fires, as well as carbon monoxide ,Temp , Humidity , Room Brightness ,LPG Detection while reducing false alarms. Smart Multi Sensor sends alerts to mobile application when some thing went wrong.

  • Device Operates with 3.3V DC.
  • Detection range: Up to 10metres
  • Detection time: Less than 2 seconds.
  • Works on 2.4GHz frequency on all channels.
  • Uses 802.11 b / g / n wireless standards.
  • Works STA / AP modes support for devices Adding and controlling.
  • Operating Temperature: -40℃ ~ + 125 ℃.
  • Operating Humidity: 10%-90% non-condensing.
  • Weight: about 100g.
  • Schedules to set smart switch to automatically turn on and off as per scheduled times.

Smart CO Sensor

Our Smart CO Sensor detector can real time monitor the CO concentration in air. When the CO concentration exceeds the standard, the detector gives out "di, di, d....." alarm and red light flashes until the ambient gas volume falls below alarm set point. Will get alert in Mobile application when Co levels exceeds the threshold level .

  • Device Operates with 3.3V DC.
  • Detection range: Up to 10metres
  • Detection time: Less than 2 seconds.
  • Works on 2.4GHz frequency on all channels.
  • Uses 802.11 b / g / n wireless standards.
  • Works STA / AP modes support for devices Adding and controlling.
  • Operating Temperature: -40℃ ~ + 125 ℃.
  • Operating Humidity: 10%-90% non-condensing.
  • Weight: about 100g.
  • Schedules to set smart switch to automatically turn on and off as per scheduled times.

Smart Flood Sensor

Smart Flood Sensor detects the water leaking in some places like kitchen, bathroom..., the water sensor can detect water, and immediately prompt with real-time sound and light alarm to notify you. Will get alert in mobile as well .

  • Device Operates with 3.3V DC.
  • Detection range: Up to 10metres
  • Detection time: Less than 2 seconds.
  • Works on 2.4GHz frequency on all channels.
  • Uses 802.11 b / g / n wireless standards.
  • Works STA / AP modes support for devices Adding and controlling.
  • Operating Temperature: -40℃ ~ + 125 ℃.
  • Operating Humidity: 10%-90% non-condensing.
  • Weight: about 100g.
  • Schedules to set smart switch to automatically turn on and off as per scheduled times.

Smart Window Sensor

Smart Window Sensor is a WiFi based Magnetic door alarm sensor with 130db alerts a person to a door or window opening .Will get alert on mobile when window or door open.

  • Device Operates with 3.3V DC.
  • Detection range: Up to 10metres
  • Detection time: Less than 2 seconds.
  • Works on 2.4GHz frequency on all channels.
  • Uses 802.11 b / g / n wireless standards.
  • Works STA / AP modes support for devices Adding and controlling.
  • Operating Temperature: -40℃ ~ + 125 ℃.
  • Operating Humidity: 10%-90% non-condensing.
  • Weight: about 100g.
  • Schedules to set smart switch to automatically turn on and off as per scheduled times.

Smart Beam Sensor

Smart Beam Sensor is a WiFi based intelligent reflected beam smoke detectors that are uniquely suited for protecting open areas with high ceilings where other methods of smoke detection that are difficult to install and maintain. These detectors are designed to send alerts to the mobile application when some detection happens.

  • Device Operates with 3.3V DC.
  • Detection range: Up to 10metres
  • Detection time: Less than 2 seconds.
  • Works on 2.4GHz frequency on all channels.
  • Uses 802.11 b / g / n wireless standards.
  • Works STA / AP modes support for devices Adding and controlling.
  • Operating Temperature: -40℃ ~ + 125 ℃.
  • Operating Humidity: 10%-90% non-condensing.
  • Weight: about 100g.
  • Schedules to set smart switch to automatically turn on and off as per scheduled times.

Smart Energy Meter

Smart Energy Meter is a Wi-Fi based intelligent power measurement engine to know the individual room power usage using mobile application.

  • Device Operates with 3.3V DC.
  • Power rating 5HP.
  • Works on 2.4GHz frequency on all channels.
  • Uses 802.11 b / g / n wireless standards.
  • Works STA / AP modes support for devices Adding and controlling.
  • Operating Temperature: -40℃ ~ + 125 ℃.
  • Operating Humidity: 10%-90% non-condensing.
  • Weight: about 100g.
  • Schedules to set smart switch to automatically turn on and off as per scheduled times.